This is NOT a sponsored post.
In the last post I talked about being a beginner and choosing a bike. Today I want to talk about being very uncomfortable on that 29" wheel size, and how I've come to accept, and even kind of love, my 29er.
I told you guys how I was fitted at my local bike shop and that I later regretted not going with a smaller wheel size & why. But let's back track here. I want to tell you guys a story that I hope will make you understand why I initially hated this bike so much.
My local bike shop is located in front of a park that contains some of the best mountain bike trails in our area, as far as technicality goes. I had ridden them with my husband on a men's 26" Schwinn Sidewinder a couple of times and I was afraid to do most of things on the trail. My husband was convinced that I needed a better bike. I had been riding the Schwinn Sidewinder "mountain bike" on some closer, less technical trails. Not only was I working really hard & developing bad technique habits on a bike not fitted to me, but the bike was just not standing up to trail use very well.
So off to our local bike shop we went. The employees were warm & friendly people, pretty much responsible for the introduction of our love of the cycling community. They were more than bike sales men & women. They are people we consider friends. I was more than happy to be dealing with them.
They fitted me to a frame size and adjusted my seat height, then let me try out 2 wheel sizes, a 29" (29er) & a 27.5 (650b).
I tried out a few bikes, not being very familiar with the world of bikes or really understanding what I personally needed from one. I felt more comfortable on a 27.5" wheel, but the guys were all convinced that a 29er was better suited for me.
I excitedly purchased a Specialized Jett 29er, then hurried to the park where I left my husband and kids to take my new beauty to the trail. I rolled up to the first steep descent. One of many that I never had the confidence to roll.
I took a deep breath... I was totally excited where I normally felt fear. Ok... more nervous excitement in place of terror.
I rolled up, looked at the descent to find my line, backed up to get my footing, and reminded myself of their words.
"Trust your bike". "The 29er will give you confidence." "You'll roll stuff easily." "My girlfriend was afraid to do things but has a 29er now and is doing the big stuff."
I backed up to make sure I had room to get my footing, and I rolled it.
What the!?!
I rolled it!
YES!
I just rolled this descent, heart pounding and excited that I did it! I was trusting my bike!
Something I should not have done because I crashed. I ate it HARD. I bent my wheel, ruined my derailleur, lost my chain and could hardly stand to walk my bike back to my truck.
(via Pinterest)
All that upon entering the trail. ENTERING. I didn't even ride ANY part of the trail on my new bike. I was pissed. I limped my bike (and fragile ego) back to the truck and looked at my husband, trying to hold the tears back from the pain (and mostly anger) I was feeling and told him next time I would trust myself.
(My leg healing, 2 months after crash.)
My advice to you is do not trust your bike. Use good judgement. If you're feeling unconfident, go around features until you build up to it. Do not try to roll something you feel might be beyond your skill level. If you visit a bike shop, trust yourself and go with what feels more comfortable to you. After all, you'll be more confident if you're comfortable on your ride.
I tried taking the bike out after my leg healed enough that I could stand using the muscle. My husband had replaced my derailleur, wheel & chain. I just couldn't seem to get comfortable on it. It was hard to turn. I felt top heavy. I thought every little bump in the road was going to throw me off my bike. That was when I set it down and didn't ride at all for almost a year.
I don't remember why I decided to try and ride again... and I guess it doesn't even matter, but I was back in the saddle...eventually. Awkwardly. I started out keeping it to pavement for a very long time just trying to get to know my bike better. I started researching technique and things I needed to practice before hitting the trail again.
That was the best move I could have made. If I could offer one piece of advice, and only one, I would say, that before you give up cycling for good do a little research on how to improve your rides. Sometimes all of the information can be over-whelming. Especially if you're new to the bike world. So I'm going to share my favorite beginner basics that helped me improve my rides and build confidence on the trail.
1) Tire pressure.
The biggest part of my failure on my first ride out was not checking the tire pressure. My tires were fully inflated. Exact tire pressure is based on personal preference, but running 20-25 PSI on the trail is a popular preference among mountain bikers in my area. The tires grip better at a low pressure and they don't bounce and slide like fully inflated tires do. I usually run 18 psi in the front & 22 psi in the back. That is where I am comfortable.
2) Seat Position.
For speed and riding that doesn't wear you out as quickly, it is recommended that your seat be adjusted so that your leg is reaching full extension while you're peddling, but not so far that you're on your tippy toes. A good way to tell if your seat is too high is if you feel your hips rocking from side to side.
This is a great way to help you go further with less work. It will give you a more comfortable ride that won't wear you out as quickly. The problem that came in for me was that I felt so top heavy with my seat adjusted to full leg extension that I was scared to ride my bike. So I started with my seat low and each week I raised it just a little to get comfortable with the new height until one day I reached full leg extension.
Just make sure you will be able to shift your weight behind your seat when rolling descents. If you can't get behind your seat you may need a more narrow seat or you may need to consider a dropper seat post.
3) Technique.
Speaking of being able to get behind your seat. This is so important. For instance, being able to shift your weight to the back of your bike for a descent or downhill obstacle gives you more control in the front and keeps you from going over the handle bars. These things may seem super basic to a lot of people, but they were things I didn't know.
Turns
Turns on a 29" bike were a lot more difficult to me. The 26" was much more nimble. I felt much more control on it than the 29er. When I researched technique for making tighter turns on the 29er I discovered that your "flow" is most important. To find flow, you hit the trail going only as fast as you can without using your brakes on corners and turns. You try to keep the wheel as straight as you can as you lean the entire bike to go around corners rather than turning the wheel. As you become more comfortable in your flow you increase your speed.
After practicing this technique my rides improved drastically.
Braking
Speaking of braking, when braking on descents and downhill, always use your rear brake. Remember "right rear". Your rear brake is your right lever. Using your front break will send you flying.
Shifting
Let's touch on shifting. If you're unfamiliar with shifting, here is a great article from www.bicycling.com on how to shift. By learning how to shift effectively, your rides will become more fun and less work.
Conclusion
After 3 years of riding, my opinion on the 29er is that you give up control for speed. However, with the right technique, and lots of ride time, you can gain more confidence, control and have a ton of fun. Get plugged into the cycling community. Find your local MTB and trail Facebook pages. Go on group rides. The cycling community is warm, encouraging and a wealth of knowledge and information that will help you in your cycling journey.